Forum Discussion

fc's avatar
fc
New Contributor III
2 months ago
Solved

Manual input not possible on one scenario but possibile on another

Hi everyone, I'm having problems in writing data to one scenario through a cubeview.  I have 2 scenarios available. If in the cubeview I use one of them, it allows me to manually input data. If I ch...
  • T_Kress's avatar
    2 months ago

    There are many things you may need to check:

    1.   Are the two scenarios the same scenario type
    2.   If not do both scenarios have a Forms step that is Active = "True"
    3.   Are you using WF channels?
    4.   If you are using WF channels is there a forms step Active = "True" for the forms WF channel
    5.   Are you using any no input BRs or Data Access Security on the cube?
    6.  Are you using C#Aggregated for input in the cube view and if so is that set to True for the scenario property?

     

    I am assuming you are using the same cube view but there is a setting on the cube view which is Can Modify Data = True.

    My starting point to trouble shoot would be to right click on the intersection and look at the Cell Status and see if that helps shed any light.