Forum Discussion

AndreaF's avatar
AndreaF
Contributor III
2 years ago

Connector rule - drill back IF statement

Hi,

I am experiencing a strange behavior with a piece of code in the drill back of a connector rule.

I have the following piece of code:

 

If StageTableFields.StageSourceData.DimUD1.XFEqualsIgnoreCase("Zero") Then
    whereClause.Append("And (Department IS NULL) ")
'Else
'    whereClause.Append("And (Department = '" & SqlStringHelper.EscapeSqlString(sourceValues.Item(StageTableFields.StageSourceData.DimUD1).ToString) & "') ")
End If

 

 When the ELSE condition is excluded as above the first IF works:

However, with the ELSE condition included (see code below) the retrieve from the Zero values does not work anymore:

 

If StageTableFields.StageSourceData.DimUD1.XFEqualsIgnoreCase("Zero") Then
    whereClause.Append("And (Department IS NULL) ")
Else
    whereClause.Append("And (Department = '" & SqlStringHelper.EscapeSqlString(sourceValues.Item(StageTableFields.StageSourceData.DimUD1).ToString) & "') ")
End If

 

Any idea why this is happening? Thank you

Data Sources
  • AndreaF's avatar
    AndreaF
    2 years ago

    Thank you Daniel, I have used the below to check what was happening with the IF statement

    Throw New XFUserMsgException(si,sqlScript.ToString,"","")

    and I discovered that the StageTableFields.StageSourceData.DimUD1 command returns the string "UD1", while what I wanted was the source value (e.g. "Zero"), so the correct code is the following

    If sourceValues.Item(StageTableFields.StageSourceData.DimUD1).ToString.XFEqualsIgnoreCase("Zero") Then
    whereClause.Append("And (Department IS NULL) ")
Else
    whereClause.Append("And (Department = '" & SqlStringHelper.EscapeSqlString(sourceValues.Item(StageTableFields.StageSourceData.DimUD1).ToString) & "') ")
End If

     It was only a coincidence that in my original code was returning rows with Null Department when excluding the Else condition.

  • DanielWillis's avatar
    DanielWillis
    Valued Contributor
    2 years ago

    It sounds like your assumption is that your initial IF condition is being met. Are you sure that is the case? Perhaps no 'where' clause is getting appended when you omit the ELSE as it's not meeting the IF condition and whe you include it, all of a sudden you're limiting the query to an empty resulset

    • AndreaF's avatar
      AndreaF
      Contributor III
      2 years ago

      Thank you Daniel, I have used the below to check what was happening with the IF statement

      Throw New XFUserMsgException(si,sqlScript.ToString,"","")

      and I discovered that the StageTableFields.StageSourceData.DimUD1 command returns the string "UD1", while what I wanted was the source value (e.g. "Zero"), so the correct code is the following

      If sourceValues.Item(StageTableFields.StageSourceData.DimUD1).ToString.XFEqualsIgnoreCase("Zero") Then
    whereClause.Append("And (Department IS NULL) ")
Else
    whereClause.Append("And (Department = '" & SqlStringHelper.EscapeSqlString(sourceValues.Item(StageTableFields.StageSourceData.DimUD1).ToString) & "') ")
End If

       It was only a coincidence that in my original code was returning rows with Null Department when excluding the Else condition.

      • DanielWillis's avatar
        DanielWillis
        Valued Contributor
        2 years ago

        Nothing seems to beat fresh eyes on an issue sometimes!